To many, even basic car maintenance can seem daunting. If you’ve ever taken a look under the hood of your car, it may seem like a complicated mess of hoses, wires, blocks and belts. While some vehicle maintenance should generally be left to the professionals, there are a few things that you can easily take care of yourself.
Checking Fluids Under The Hood
Fluids play an important role in your engine and car health. So, pop the hood and follow along for ways to ensure you are doing your part to keep your vehicle running smoothly.
- Park your car in a well-lit, flat area and let it cool off for at least 20 minutes. Then, prop your hood up and you’re ready to go.
- You should check your fluid levels every 1-2 months.
Keep These in Your Vehicle at All Times:
- Owner’s manual
- Spare rag or towel
- Funnel
- Gloves (optional, but a good way to protect your hands)
- Wipes for cleaning your hands
How to Check Your Oil
- Identify the dipstick. It should be a thin rod with a circular ring at the top or there might be a small handle. Don’t mistake it for your transmission fluid dipstick. Check your owner’s manual or vehicle guide to be sure.
- Pull the dipstick all the way out, wipe the end of it on a rag or a towel to clean it and reinsert the stick. This will help you get a clean reading of the fluid level.
- After a few moments, pull the dipstick out again and look to see if the oil level is near the FULL line.
- If it isn’t, you may need to add more oil (your owner’s manual should tell you what kind of oil to use).
- Never overfill your oil reservoir.
- To add oil, you need to locate the oil reservoir (Note: You cannot add oil through the tube containing the dip stick. Use your owner’s manual to identify the proper location). Remove the cap, use a funnel to add oil, wipe up any oil that may have spilled, return the cap securely and recheck the levels after giving it time to settle.
- If you find you’re adding oil regularly, you probably have a leak and should have it checked by a professional.
- If the oil is black or dark brown, instead of a shiny, clear light brown, then you probably need to have the oil changed.
How to Check Your Windshield Wiper Fluid
- Identify the windshield wiper fluid reservoir. Typically it’s a large, white plastic container with an image of a windshield on the lid.
- If you aren’t sure it’s the correct reservoir, consult your owner’s manual or vehicle guide.
- If the fluid level is lower than the fill line or less than three-quarters full, remove the cap and add windshield wiper fluid using a funnel. Do not add water.
- Wiper fluid is a mixture of soap and anti-freeze to ensure the fluid does not freeze in cold weather. You can purchase the fluid for a few dollars at most gas stations, and any auto parts store.
- Be sure to secure the lid when you’re finished.
Check Engine Light
“Service engine.” “Check engine.” “Service engine soon.” Regardless of what that little control panel indicator may say, it can strike fear into the hearts and minds of drivers. While we can’t advise you on how to solve the problem, we would like to offer a little insight into this mysterious and worrisome indicator.
Why is my check engine light on?
It depends on a few factors since every car is slightly different. You should plan on taking your car to a mechanic or the dealer to have it looked at—sooner rather than later—since many of the issues reported by the check engine light can be seriously damaging to your engine. However, some vehicles do have slight variations in the indicator to express whether it’s a dire emergency or something to get checked within a few weeks.
Your owner’s manual may shed some light on how the indicator is displayed for your vehicle, but here are a few common scenarios:
- If the check engine light appears as a solid light, this can (on some makes and models) indicate a less serious issue.
- If the indicator lights up and blinks, this usually means it’s something more serious that requires immediate attention. It’s like a “Hey! Over here! Pay attention to me!” distress call.
- Some manufacturers distinguish severity by the color of the indicator. Yellow can mean important but not serious while red indicates a more pressing issue that requires attention.
Regardless of whether it’s blinking, solid, yellow or red, you still need to have a professional look at the vehicle.
A few other things to consider:
- Look for obvious indicators in addition to the check engine light that may provide more information. Is the car overheating? Is the oil pressure low? Is the engine behaving strangely? In all of these situations, pull over as soon as it’s safe and turn the engine off.
- Check to make sure your gas cap isn’t loose. This can trigger the sensor and cause the indicator to engage. While the light may not reset immediately, it is quick and easy check.
- If you are towing a trailer or a heavy load and the light comes on, you may be overloading the engine.
I’ve heard about a “code” that the sensor stores. What’s this for?
The check engine light is part of a system that constantly monitors diagnostics relating to emissions, engine efficiency and fuel efficiency, among other things. The computer that controls all of these components will turn the indicator on when a problem is identified. It simultaneously stores a code that provides some information about the problem.
Most auto parts stores can read this code and provide some information about the source of the indicator. You can purchase a scanning tool and extract the code yourself, but unless you are a professional, the code is often meaningless. It simply provides a general guideline of where to look for the problem instead of detailing the faulty component.
If your vehicle has OnStar, an OnStar representative can often read the code remotely and provide instructions on what your next steps should be.
So remember, if the indicator comes on, drive gently to prevent strain on your engine, take stock of the major red flags like an overheating engine or low oil pressure and have your vehicle looked at by a trusted professional as soon as possible.
Get peace of mind on the road by downloading GEICO Mobile today, where things like roadside assistance, digital ID cards, and more are right at your fingertips.
Next article: Top 4 Causes of Summer Car Breakdowns
Ron says,
While checking fluids, now would be a good time to also check wiper blades. I always carry a new pair in the vehicle for one time needed and noone is open or has my blade size. Great time to buy just before winter when most are on sale, but don’t be cheap when buying ,go for better if not best.
jaredb1346@outlook.com says,
Can being low on break fluid make the check engine light come on?
Lorrie Judd says,
Thank you. I’ve taken my Jeep to the shop twice already because the engine light is on and they have not noticed that my coolant was very low. They have changed the spark plugs and wires and the engine light came back on. I put in coolant and a hoping that solves the problem.
Darla says,
Wow! I never thought about things in my trunk that I carry around! Thanks for the information. It was very useful.
Mardals says,
It’s a helpful information , thank you very much
Kama Linden says,
2x its been my gas cap. You are right. Solid yellow
Jose Torres Melendez says,
My 2015 Hyundai Sonata Limited will let me know if the windshield fluid is low
Rajendar Madahar says,
Very helpful tips and some useful message how to fix the easy one Little education about car mechanism sometimes save you from major expensive repairs work
Bambi says,
As always, Geico is fabulous!! Been a member for ten years and they have always helped me in every situation and educating me about my car! Thank you GEICO. You are the best!!
Ana Maria Suarez says,
Thank you,
Ana Maria Suarez says,
Thank you, very helpful.
chuck vick says,
Dodge Durango
If the engine light goes on and I check the transmission fluid level and need to add fluid. after adding fluid and check the stick and the levels o k, will the check engine lite go off or do i need to get it adjusted?
chris scovitch says,
1993 ford van E-350 140,000 miles start up fine, idle control adjust in 10 to 15 seconds. I can let it ldle for ten minuets afterward and the motor is still smooth running. As I start to go up the street and accelerate ” Engine light” comes on. Still running smooth. Changed out EGR valve and 02 sensor. Wonder if it could be a vaccum line disconected somewhere? Got me puzzled. I noticed that the heater control works only in defrost. Can you shine any light on this problem?
Kris says,
Have you checked your fan? Our would overheat and came to find out our car has two fans. One the one can was replaced we had no overheatage and also have colder a.c. than before.
Jim says,
Since approximately May, 2015 I have intermittently received the following engine codes;
$07E8
$07EA
$07EB
I have the Autel Scan Tool and am able to reset. I have gone to my mechanic and he assured me that these are none critical codes and they will not cause any damage. I have a 2009 Saturn VUE, but am still concerned since these codes keep coming up. Can you offer any advise.
KS says,
Great article. I still recommendThe Greaseless Guide to Car Care Confidence Paperback – February 1, 1991, by Mary Jackson (Author) – it’s dated, but engines are still engines. and it covers the basics For some things you do need a mechanic, and someone said it, most dealers are crooked. Find a reliable mechanic, ask for replaced parts to be given to you so you can see the damage, and question everything. And get a good repair book, Chilton’s are usually good, so you can talk to your mechanic in his/her language and maybe save yourself some money by doing simple fixes on your own.